|
Florestone
Saflor®
3636-2 Corner
Shower Base
Architect’s
Specifications
Furnish and install 3636-2 Saflor® Shower Base
manufactured by Florestone. The base shall have a
slip-resistant design that does not interfere with the
flow of water nor trap it. Base to have integral molded
drain and square finished design to allow either
right-hand or left-hand installation. Base to have not
less than 1" flange on two sides and to be stain and
fungus resistant. Color to be off-white (unless other
specified) and will be resistant to fading and
abrasion.
Model shall conform to ANSI-Z-124.2.
SAFLOR® Options and Accessories
Biscuit, Bone
Josam Jiffy-Joint™
Wedge-Lok® Seal
Strainer, Brass
Strainer, Chrome
Strainer, Plastic
Repair Kit
|
Dimensions may vary ± ¼ inch. Please check
unit before installation.
Place base on a minimum ¼" bed of
mortaror plaster for warranty compliance.
|
|
|
One piece, double threshold model for corner
installation. Square 36" x 36" dimension
allows either right-hand or left-hand corner
installation.
Click for Large View
|
