|
ACCESSIBLE
|
Florestone
Model 500 Barrier-Free
Terrazzo Bases
Architect's
Specifications
Furnish and install wheelchair accessible Terrazzo Shower
Base Model 500 as manufactured by Florestone. Flanges on
three sides, cast integral, shall be of
galvanized-bonderized steel and shall extend not less than
1" above the shoulders. Shoulders on three sides
shall be not less than 2½" inside. Model 500
to have integral ramp. Drain body shall be brass, cast
integral, and shall provide for a non-caulked connection
not less than one inch deep to a 2" pipe. Removable
type stainless steel strainer plate shall be supplied.
Base shall be manufactured of tan and white marble chips
cast in white Portland cement to produce a compressive
strength of not less than 3,000 PSI, seven days after
casting. Terrazzo surface shall be ground, polished, and
the entire unit sealed to resist stains and moisture.
Bases reinforced with 16-gauge wire.
Options
Offset drain
Additional flanges
(Drawings required)
Dimensions may vary ± ¼ inch. Please
check unit before installation.
|
For barrier-free installation, contractor shall
provide recess for curb in sub floor.
|
|
Standards:
|
I.A.P.M.O. Listed File 0687
|
|
ANSI-Z-124.2 |
|
|
Note: Terrazzo is not designed to be used with anything
that is over 130 degrees Fahrenheit.
|
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
|
|
|
CAD Drawings are compressed in zip format (.zip)
|
Installation PDF