SEARCH

SHOWER RECEPTORS


Florestone Terrazzo
Model 500 Barrier-Free
Shower Receptors

Architect’s
Specifications


Furnish and install wheelchair accessible Terrazzo Shower Receptor Model 500 as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized-bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2½" inside. Threshold shall be not more than ½" above receptor floor to allow for barrier free entrance with an integral ramp. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture. Receptors reinforced with 16-gauge wire.


Options


Offset drain.
Additional flanges. (Drawings required)

Model 500
Barrier free Terrazzo Shower Receptors with built-in stainless steel ramp.

Click for Large View


Note: Terrazzo is not designed to be used with anything
that is over 130 degrees Fahrenheit.

A

B

C

D

E

HT

WT


36"

36"

18"

18"

12"

7"

315

40"

40"

20"

20"

12"

7"

370


42"

48"

21"

21"

12"

7"

510

48"

48"

24"

24"

18"

7"

550


Note: Exterior floor drain for water run-off recommended.



Dimensions subject to
change without notice
Contact Florestone Products to
verify product specifications.

Standards:

I.A.P.M.O.

International Association of Plumbing and Mechanical Officials File No. 0687.






Model PDF
Model CAD


Installation PDF
Pricing PDF
Section PDF
Section CADs



CAD Drawings are compressed in zip format (.zip)


Get Media Viewers
Acrobat Reader
CAD Viewer
IZArc Zip Utility

Contact Us | How to Order | Products

Copyright ©2011 Florestone Inc.