SEARCH

NON-ADA/SPECIAL NEEDS


Florestone
Model 500 Barrier-Free
Terrazzo Receptor

Architect’s
Specifications



Furnish and install wheelchair accessible Terrazzo Shower Receptor Model 500 as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized-bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2½" inside. Model 500 to have integral ramp. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture. Receptors reinforced with 16-gauge wire.

Options
Offset drain
Additional flanges
(Drawings required)



Dimensions may vary ± ¼ inch. Please check unit before installation.


Note: Exterior floor drain for water run-off recommended.

For barrier-free installation, contractor shall provide recess for curb in sub floor.



Click for Large View

Standards:


I.A.P.M.O. File No. 0687


Note: Terrazzo is not designed to be used with anything
that is over 130 degrees Fahrenheit.

A*

B

C

D

E

HT

WT


36"

36"

18"

18"

12"

7"

315

40"

40"

20"

20"

12"

7"

370


42"

48"

21"

21"

12"

7"

510

48"

48"

24"

24"

18"

7"

550


Dimensions subject to
change without notice
Contact Florestone Products to
verify product specifications.





Model PDF
Model CAD


Installation PDF
Pricing PDF
Section PDF
Section CADs



CAD Drawings are compressed in zip format (.zip)


Get Media Viewers
Acrobat Reader
CAD Viewer
IZArc Zip Utility

Contact Us | How to Order | Products

Copyright ©2011 Florestone Inc.