Model 23-2HR
Shower Receptor

46¼ x 52" x 3"
Weight: 500 lbs.


Furnish and install wheelchair accessible terrazzo shower receptor Model 23-2HR as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized-bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2½" inside. Threshold shall be not more than ½" above receptor floor to allow for barrier free entrance. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture after any air holes and/or pits are grouted. Receptors reinforced with 16-gauge wire.

Dimensions may vary ± ¼ inch. Please check unit before installation.

For barrier-free installation, contractor shall provide recess for curb in sub floor.

Click for Large View


I.A.P.M.O. File No. 0687

Note: Terrazzo is not designed to be used with anything
that is over 130 degrees Fahrenheit.

Dimensions subject to
change without notice
Contact Florestone Products to
verify product specifications.

Model PDF
Model CAD

Installation PDF
Pricing PDF
Section PDF
Section CADs

CAD Drawings are compressed in zip format (.zip)

Get Media Viewers
Acrobat Reader
CAD Viewer
IZArc Zip Utility

Contact Us | How to Order | Products

Copyright ©2011 Florestone Inc.