|
ADA COMPLIANT
|
Florestone
Model 400 Barrier-Free
Terrazzo Shower Base
Architect's
Specifications
|
Some Models Conform to ADA REQUIREMENTS*
|
Furnish and install wheelchair accessible Terrazzo Shower
Base Model 400 as manufactured by Florestone. Flanges on
three sides, cast integral, shall be of galvanized -
bonderized steel and shall extend not less than 1"
above the shoulders. Shoulders on three sides shall be not
less than 2½" inside. Threshold shall be not
more than ½" above base floor to allow for
barrier free entrance. Drain body shall be brass, cast
integral, and shall provide for a non-caulked connection
not less than one inch deep to a 2" pipe. Removable
type stainless steel strainer plate shall be supplied.
Base shall be manufactured of tan and white marble chips
cast in white Portland cement to produce a compressive
strength of not less than 3,000 PSI, seven days after
casting. Terrazzo surface shall be ground, polished, and
the entire unit sealed to resist stains and moisture.
Bases reinforced with 16-gauge wire.
Options Offset drain.
Additional flanges.
(Drawings required)
Dimensions may vary ± ¼ inch. Please
check unit before installation.
|
|
|
Dimensions may vary ± ¼ inch. Please check
unit before installation.
For barrier-free installation, contractor shall
provide 1½" minimum recess for curb in sub
floor.
|
|
Dimensions subject to
change without notice
|
Contact Florestone Products to
verify product specifications.
|
|
|
|
CAD Drawings are compressed in zip format (.zip)
|